Savin F ax Machine 1018 - Manual (Page 164)

Changing Key Operator Settings
81
6
Note
❒ When Restricted Access is
turned on and you enter a per-
sonal code to use the machine,
Personal Code Transmission is
selected by default.
Polling ID
Use this procedure to register the
Polling ID code.
This ID is required for using the
Transfer Request (See P.13 “Transfer
Request” ).
Limitation
❒ When you use Transfer Request,
register the same ID code as that
registered on the sender's ma-
chine.
Note
❒ A Polling ID can be any combina-
tion of digits (0 - 9) and letters (A -
F) except for 0000 and FFFF.
A
Press the
{{{{User Tools}}}} key.
B
Press
0 0 0 0 or 1 1 1 1 until "4. Fax Fea-
tures" is displayed.
C
Press the
{{{{OK}}}} key.
D
Press
0 0 0 0 or 1 1 1 1 until "6. Key Op.
Tools" is displayed.
E
Press the
{{{{OK}}}} key.
Note
❒ If the key operator code is regis-
tered and turned on, enter the
key operator code and press the
{OK} key.
F
Press
0 0 0 0 or 1 1 1 1 until "6. Polling ID"
is displayed.
G
Press the
{{{{OK}}}} key.
H
Enter the Polling ID (4-digits)
with the number keys.
If you make a mistake, press the
{Clear/Stop} key and try again.
I
Press the
{{{{OK}}}} key.
If you want to enter another item,
repeat the above steps from step
G.
J
Press the
{{{{Cancel}}}} key on each
display until you reach the stand-
by display.