Savin F ax Machine 1018 - Manual (Page 41)

Dialing
31
2
- - - -Restrictions When Dialing with
the Number Keys
F a x n u m b e r s e n t e r e d w i t h t h e
number keys are stored in internal
memory (separate from memory for
storing original data). Therefore, you
cannot program more than 99 num-
bers with the number keys for the fol-
lowing:
• Destinations specified in a Memo-
ry Transmission (including Polling
Reception)
• Transfer Stations and End Receiv-
ers specified in a Transfer Request
• Destinations specified in a Group
For example, when 90 destinations
are registered in a Group with the
number keys, only 9 destinations can
be dialed for Memory Transmission
from the number keys.
Note
❒ When this machine is requested to
transfer a call (i.e. becomes a
Transfer Station), 2 fax numbers
are automatically stored. There-
fore, the number of destinations
that can be dialed from the number
keys decreases by two whenever
this machine is requested to trans-
fer a call.
❒ If a memory file is awaiting trans-
mission and the "Exceeded the
Max. Cannot Add"
message is dis-
played when dialing with the
number keys, you cannot dial any
more numbers. That is because the
fax numbers have been dialed with
the number keys for some of the
files awaiting transmission. When
these files have been sent and their
fax numbers are deleted from
memory, additional fax numbers
can be dialed.
❒ The display shows the percentage
of free memory space for storing
originals. Since fax numbers are
stored in separate memory, dialing
fax numbers with the number keys
does not change the percentage on
the display.
Pause
Press the
{Pause/Redial} key when di-
aling or storing a number to insert
about a two-second pause.
Limitation
❒ You cannot insert a pause before
the first digit of a fax number.
Note
❒ A pause is shown as a "-" on the
display.
❒ You can insert a pause in numbers
stored in Quick Dials and Speed
Dials.