Savin F ax Machine 1018 - Manual (Page 35)

Immediate Transmission
25
2
Reference
P.30 “Dialing”
See Chapter 3 “Chain Dial” in
the Advanced Features manual.
E
Press the
{{{{Start}}}} key.
The machine calls the destination.
While it is dialing, the number or
name which is programmed as the
Own Name or Own Fax Number
in the machine of the other party is
shown on the display. When con-
nected, the machine starts scan-
ning the original.
Reference
P.37 “Own Name/Fax Header/
Own Fax Number”
After transmission the machine
will return to standby mode.
Sending Originals from the
Exposure Glass
A Place the first page face down
on the exposure glass.
B Dial.
C Press the {{{{Start}}}} key.
The machine starts scanning the
original.
D Place the next original on the
exposure glass within 10 sec-
onds after the machine has fin-
i s h e d s c a n n i n g t h e f i r s t
original.
Note
❒ Repeat steps C to D for all
originals.
❒ When you press the {p}
key, you can select the irreg-
ular size by pressing the
0 or
1 key.
Press the
{q} key to finish.
E Set the last original.
F Press the {{{{Start}}}} key.
The machine starts to call the
destination.