Sony 5500 - Manual (Page 147)

147
Menu List
App
end
ix
117 SCREEN SAVER 3 min
10 min
60 min
[off] Selects the time after which the screen saver function
operates for the color display.
118 SCREEN SAVER S [off]
on Set the screen-saver for the information display.
off: Do not use screen-saver.
on: Use screen-saver.
The information display reverses at regular intervals.
120 WARNING
DISPLAY [off]
on Selects whether warning messages should be displayed in
the lower part of the time code display for the HOME menu,
the TC menu, the PF1 menu, and the PF2 menu.
off: Do not display warning messages.
on: Display warning messages.
Notes
• No warning messages are displayed for the CUE menu,
so check by viewing a menu other than the CUE menu.
• If LOST LOCK occurs during playback or recording, a
LOST LOCK warning message is always displayed.
121 INFO DISPLAY
MODE rotation
latch
[momentary] Sets the display mode for the information display.
rotation: The display automatically changes in sequence, at
regular intervals.
latch: Hold down the MULTI CONTROL knob and turn it to
change the display, which remains unchanged when
you release the knob.
momentary: Hold down the MULTI CONTROL knob and
turn it to change the display; after a set time interval,
the display reverts to the first page.
122 MULTI CUE CLEAR
by inject [on]
off Selects whether to erase cue point data in multi-cue mode
when a cassette is inserted.
on: Erase cue point data.
off: Do not erase cue point data.
124 Tele-File MENU
auto popup [off]
on Specifies whether or not the TELE FILE menu appears
automatically when a cassette with a memory label is
inserted.
off: The TELE FILE menu does not appear.
on: The TELE FILE menu appears.
125 Tele-File THREAD
COUNTER clear
mode [not clear]
when format Specifies whether or not the thread counter is reset when a
memory label is formatted.
not clear: The thread counter is not reset.
when format: The thread counter is reset.
126 Tele-File ENTRY
POINT IN/OUT Point
[CUE Point] Specifies whether or not to display the log data (IN and
OUT points) in the TELE FILE menu.
IN/OUT Point: The log data (IN and OUT points) is
displayed.
CUE Point: The log data (IN and OUT points) is not
displayed.
127 Tele-File IN OUT
Input Continue on
[off] Specifies whether or not to input the log data (IN and OUT
points) continuously in the TELE FILE menu.
on: The log data (IN and OUT points) can be input
continuously.
off: The log data (IN and OUT points) cannot be input
continuously.
128 Tele-File Real Date/
Real Time Mode [without]
with When recording Tele-File data, select whether to record the
real date/time.
without: Do not record real date/time.
with: Record real date/time.
Item number Item Setting Function