Sony 5500 - Manual (Page 177)

177
Menu List
App
end
ix
A05 PD EXT SD REF
LOCK MODE [off]
lock1
lock2 When the operating frequency is set to 23.98PsF, specifies
whether or not the pulldown output signal and down-
converted output signal are synchronized with the
reference signal by the REF. INPUT 2 connector.
off: The pulldown output signal and down-converted output
signal are not synchronized with the reference signal
by the REF. INPUT. 2 connector.
lock1: The pulldown output signal and down-converted
output signal are synchronized with the reference
signal by the REF. INPUT 2 connector.
lock2: The pulldown output signal and down-converted
output signal are synchronized with the reference
signal by the REF. INPUT 2 connector. When the PB/
EE mode is selected, the amount of delay on the A
frame of the pulldown output signal for the A frame of
the main video signal is fixed to 2 frames (59.94i).
Notes
• A warning message appears when the HD reference
signal and REF. INPUT 2 reference signal are not input or
not synchronized.
• “lock1” and “lock2” are effective only when the operation
mode of this unit is set to 23.98/24PsF.
• When editing in 23.98/24PsF mode, with this unit as the
recorder and with “lock2” selected, phase
synchronization may not be achieved within 5 seconds.
Also, edit In points may be out of alignment. In these
cases, select “off”.
A06 PD
SUPERIMPOSED
TIME CODE ID [off]
on When item 620 and A03 is set to “on”, specifies whether or
not the ID (24F/30F) is displayed to the right of
superimposed time code.
off: No ID is displayed.
on: ID (“24F” or “30F”) is displayed.
Note
The setting of this item is effective only when the operation
mode of this unit is set to 23.98PsF or 24PsF.
A07 PD CHARACTER
24F TIME CODE
MODE [off]
on When item 620 and A03 is set to “on”, specifies whether or
not the 2 : 3 pulldown 24-frame time data is inserted to the
first line instead of 30-frame time data.
off: 30-frame time data is displayed.
on: 24-frame time data is displayed.
Note
The setting of this item is effective only when the operation
mode of this unit is set to 23.98PsF or 24PsF.
A08 FC REFERENCE
select extrn HD
[extrn SD] Selects the signal to be the reference for the FORMAT
CONV. OUT input to the REF. INPUT 2 connector.
extrn HD: Use the HD tri-level reference signal input to the
REF. INPUT 2 connector as the FORMAT CONV. OUT
reference signal.
extrn SD: Use the SD reference signal input to the REF.
INPUT 2 connector as the FORMAT CONV. OUT
reference signal.
Item number Item Setting Function