SMC Networks EZ CONNECT SMC2755W - Manual (Page 10)

EZ C
ONNECT
™ 802.11
A
W
IRELESS
A
CCESS
P
OINT
2
Please register this product and upgrade the product warranty at
www.smc.com.
Please inform your dealer if there are any incorrect, missing or
damaged parts. If possible, retain the carton, including the original
packing materials. Use them again to repack the product in case
there is a need to return it.
Hardware Description
Ethernet Compatibility
SMC’s Wireless Access Point can attach directly to 10BASE-T/
100BASE-TX (twisted -pair) Ethernet LAN segments. These
segments must conform to the IEEE 802.3 specification.
The Access Point appears as an Ethernet node and performs a
routing function by moving packets from the wired LAN to remote
workstations on the wireless infrastructure.
Radio Characteristics
The Wireless Access Point uses a radio modulation technique
known as Orthogonal Frequency Division Multiplexing (OFDM),
and a shared collision domain (CSMA/CA). It operates at the 5GHz
Unlicensed National Information Infrastructure (UNII) band with
turbo mode. Data is transmitted over a half-duplex radio channel
operating at up to 72 Megabits per second (Mbps) in the turbo
mode, and with a maximum operating range up to 1650 feet.