SMC Networks EZ CONNECT SMC2755W - Manual (Page 32)

EZ C
ONNECT
™ 802.11
A
W
IRELESS
A
CCESS
P
OINT
24
If Shared Key is enabled, the WEP should be enabled and at least
one shared key should be defined. But you can enable WEP, and
set the authentication type as open system.
Standard WEP Setup (WEP Default: Disable)
Default Shared Key – Choose the Shared Key that has the
encryption string you prefer (Key 1~4).
64-Bit Manual Entry
Key 1~4 - Each Key ID contains 10 HEX digits. All wireless
devices must have the same Key ID values to communicate.
128-Bit Manual Entry
Key ID contains 26 HEX digits. All wireless devices must have
the same Key ID values to communicate.
152-Bit Manual Entry
Key ID contains 32 HEX digits. All wireless devices must have
the same Key ID values to communicate.
Advanced WEP Setup
How to setup the Unique Key WEP:
1. Select a unique key (5 ~ 64)
2. Enter the encryption key and select the proper key size.
3. Click “Write” and “Apply” to save the encryption key.
4. If you want to read an encryption key, select the unique key
you want to read, click “read” and “Apply” to read the
encryption key.
5. If you want to delete an encryption key, select the unique key
you want to delete, click “Delete” and “Apply” to delete the
encryption key.