SMC Networks EZ CONNECT SMC2755W - Manual (Page 12)

EZ C
ONNECT
™ 802.11
A
W
IRELESS
A
CCESS
P
OINT
4
LED Indicators
The Wireless Access Point includes three status LED indicators, as
described in the following figure and table.
LED Status Description
Power On Indicates the power is being supplied.
Flashing Indicates -
• running a self-test
• loading software program
• system errors (refer to “Troubleshooting”
on page 36 for details)
Ethernet Link/Activity
(Green) On Indicates a valid 100Mbps Ethernet cable
link.
Flashing Indicates that the Access Point is
transmitting or receiving data on the
100Mbps Ethernet LAN. Blinking rate is
proportional to your network activity.
Ethernet Link/Activity
(Amber) On Indicates a valid 10Mbps Ethernet cable
link.
Flashing Indicates that the Access Point is
transmitting or receiving data on the
10Mbps Ethernet LAN. Blinking rate is
proportional to your network activity.
Wireless Link/Activity
On Indicates a valid wireless link.
Very Slow
Flashing Searches for network association.
Slow
Flashing Associated with network but no activity.
Fast Flashing Indicates that the Access Point is
transmitting or receiving data through
wireless links. Blinking rate is proportional
to your network activity.
Power
Wireless
Link/Activity
Ethernet
Link/Activity