SMC Networks EZ CONNECT SMC2755W - Manual (Page 24)

EZ C
ONNECT
™ 802.11
A
W
IRELESS
A
CCESS
P
OINT
16
Note: The “Advanced Setup”
screen allows you to view
and change the current
configurations of the
Access Point. After
modifying the
configuration parameters, you must click on the “Apply”
button to save the changes. The new settings will not take
effect until you click “Apply” to refresh the Access Point.
Then you need to click “Reboot” button to reboot the
access point. The web browser loses connectivity with the
AP web server as the access point reboots. To establish a
network connection to the rebooted access point, wait until
it has completed rebooting.
Identification
The SSID (Service Set Identification) is the name of a basic service
set provided by an Access Point. All clients that want to connect to
the Internet via an Access Point must set their SSIDs as the same as
that of the Access Point.
SSID: The Service Set ID. This should be set to the same value as
other wireless devices in your network. (Default: ANY).