SMC Networks EZ CONNECT SMC2755W - Manual (Page 17)

9
Windows Installation (98/2000/Me/NT/XP)
1. Insert the CD-ROM that comes with the package into the
CD-ROM drive on your PC, and then enter the following
command: “D:\utility\setup.” Follow the on-screen instructions
to install the utility program.
2. After you finish the installed utility, choose “Programs,” then
“SMC EZ Connect 802.11a,” and select “EZ Connect 802.11a
Configuration Utility,” from the “Start” menu.
3. The program will then detect all the SMC2755W Wireless
Access Point(s) on the network. (Default SMC2755W IP
address is “192.168.1.20”.)
4. If DHCP is turned “ON” (default setting is “Disable,” page 21)
and a DHCP server is located on the network, then the Access
Point will automatically be assigned an IP address when
booted. From the list of detected devices (see the above
screen), select and double-click on the unit you want to
configure.