SMC Networks EZ CONNECT SMC2755W - Manual (Page 35)

S
YSTEM
C
ONFIGURATION
27
Factory Default
Use the “Restore” button to load the factory default configuration
and reboot this device. Note that all user configured information
will be lost. You will also have to re-enter the password to regain
management access to this device.
Upgrade Firmware
Click “Browse” to locate the downloaded firmware file and press
“Start Upgrade” to start the upgrade process.
For latest firmware version information, visit SMC’s Web site at:
www.smc.com
Status
Clicking on the “Status” radio button on the home page displays
additional information about the Access Point Status and Station
Status as shown in the following section: