Sherwood R-671 - Manual (Page 24)

23
While displaying “SET MEMO”, check
the result of each adjustment.
6
• Each time this button is pressed, the result
changes as follows:
Example)
Confirm the results.
7
• Then “COMPLETE” is displayed and the results
are memorized.
• You cannot check the channel level results.
To check the channel level results, perform the
auto speaker setup procedure, using the OSD
menu setting procedure.(For details, refer to
“When selecting the AUTO SPEAKER SETUP”
on page 41.)
• If the results are not satisfactory, set the speaker
setup manually.(For details, refer to “SETTING
THE SPEAKER SETUP MANUALLY” on page
19.)