Sherwood R-671 - Manual (Page 34)

33
Memorizing the adjusted channel levels
• The “1” of “REF. 1” indication flickers.
After performing the steps ~ in “Adjusting the current channel level” procedure on
page 32, press the (MEMORY/) ENTER button.
1
Select the desired one of REF. 1
and REF. 2.
2
Confirm your selection.
3
• You can memorize the adjusted channel levels into preset memory(“REF. 1”, “REF. 2”) and recall the
memorized whenever you want.
• The adjusted channel levels have now been
memorized into the selected memory.
Press the CHANNEL SELECTOR button.
1
Select the desired one of REF. 1
and REF. 2.
2
Recalling the memorized channel levels
• “REF.1” (or “USER”) is displayed for several
seconds.
• If the channel level mode display disappears,
press the CHANNEL SELECTOR button
again.
• Then the channel levels memorized into the
selected preset memory are recalled.