Sherwood R-671 User Manual
Page 46
45
Press the CURSOR UP(
)/DOWN(
) buttons to select the VIDEO SELECT, then press the
ENTER button.
1
When selecting the VIDEO SELECT
• Only when one of TUNER, CD, TAPE, AUX and EXTERNAL IN is selected, you can select a video
input source on the VIDEO SELECT menu and enjoy the audio and video signals separately.
• When dubbing them onto VIDEO 1, select either VIDEO2 or VIDEO 3 on the VIDEO SELECT menu.
Press the CURSOR UP(
)/DOWN(
) buttons to select the desired video input
source.
2
Press the CURSOR UP(
)/DOWN(
) buttons to select the desired mode.
2
Note: When the digital signals from DTS, Dolby Digital or MPEG program sources are input or the
EXTERNAL IN is selected as an input source, you cannot select the TONE CONTROL and can
hear a program source without the tone effect.
Note :
• Only when the TONE CONTOL mode is set to
on, the tone(BASS and TREBLE)modes can be
select.
Press the CURSOR UP(
)/DOWN(
) buttons to select the TONE CONTROL, then press the
ENTER button.
1
When selecting the TONE CONTROL