Shiro ADSL 2/2+ Ethernet Modem - Manual (Page 37)

User Manual
Page 37 of 92
LAN
The router is preconfigured to automatically provide an IP address to each Ethernet device connected
in the local area network (LAN). However, if you are familiar with your network setup, you can manually
configure the LAN settings.
LAN Configuration
Your router’s default IP address and subnet mask are 192.168.1.1 and 255.255.255.0, respectively.
This subnet mask allows the router to support 254 users. If you want to support more users, you need
to edit the subnet mask but remember that the DHCP server function can only provide up to 255 IP
addresses. If you change your gateways’ IP address and you have DHCP enabled, the DHCP
configuration must reside within the same subnet. The default gateway is the routing device used to
forward all traffic that is not addressed to a station within the local subnet. Your ISP will provide you
with the default gateway Address.
LAN Configuration