Shiro ADSL 2/2+ Ethernet Modem - Manual (Page 79)

User Manual
Page 79 of 92
Info Events or non-error conditions of interest.
Debug Software debugging message. Specify this level only when directed by a technical
support representative.
3. Enter the IP Address where the log will be sent to.
4. Click Add.
5. Click Submit. The IP address will appear in the Select a logging destination drop- down
menu.
6. To make changes permanent, click Save Settings.
Note: When you select a log level, all log information within this severity level and levels above
(meaning, more severe levels) will be sent to the remote host.
To disable a remote log:
1. Select the IP address to be deleted from the Select a logging destination drop-down menu.
2. Click Delete.
3. To temporarily implement the changes, click Submit.
4. To make changes permanent, click Save Settings.