Shiro ADSL 2/2+ Ethernet Modem - Manual (Page 56)

User Manual
Page 56 of 92
Egress
For packets going out of the router, the markings (CoS) need to be translated to the mappings
understood by the network domains. The reverse CoS and domain mapping is configured using the
Egress. To access Egress, select QoS > Egress from the Advanced Menu. There are three Egress
modes:
No Egress mode
Layer 2
Layer 3
No Egress Mode
The default Egress page setting for all interfaces is No Egress. In this mode, the domain mapping of the
packets are untouched.
Egress