Shiro ADSL 2/2+ Ethernet Modem - Manual (Page 38)

User Manual
Page 38 of 92
To configure the LAN groupings:
1. From the Advanced Menu, select LAN > LAN Configuration.
2. Select ETHERNET in LAN group 1 and then click < Remove. No packets will be sent to the
ETHERNET interface because it does not belong to any LAN group.
3. Select ETHERNET from Interfaces and then click Add > under LAN group 2. Just like in LAN
group 1, Configure will appear in LAN group 2 to allow the definition of additional
configurations.
4. To temporarily activate the settings, click Submit.
5. To make changes permanent, click Save Settings.