Shiro ADSL 2/2+ Ethernet Modem - Manual (Page 60)

User Manual
Page 60 of 92
Layer 2
Layer 2 allows you to map an incoming packet with VLAN priority to CoS. This feature is only
configurable on the WAN interfaces as VLAN is only supported on the WAN side in the current software
release.
Layer 2
Field Description
Interface Select the WAN interface here to configure the CoS for incoming traffic. Only WAN interface can
be selected as VLAN is currently supported only on the WAN side.
Class of Service The selections are (in the order of descending priority): CoS1, CoS2, CoS3, CoS4, CoS5, and
CoS6.
User Priority The selections are 0, 1, 2, 3, 4, 5, 6, and 7.
To access Ingress Layer 2:
From the Advanced Menu, select QoS > Ingress.