Web access control – Shiro ADSL 2/2+ Ethernet Modem User Manual
Page 53
Advertising
User Manual
Page 53
of 92
Web Access Control
The Web Access Control page allows you to access the router via the web from a remote location like
your home or office.
Web Access Control
To configure Web Access:
1. From
the
Advanced Menu, select Application > Web Access Control.
2. Select
Enable Web Access Control.
3. Select
the
Connection.
4. Configure the following fields:
Remote Host IP
Remote Netmask
Redirect Port
5. Click Submit to temporarily activate the settings on the page. The WAN address is now added
into the IP Access List. This allows you to access you router remotely.
6. To make changes permanent, click Save Settings.
Advertising