Sagem 4450E - Manual (Page 130)

SAGEM 3P@C
3P@C Installation Manual
Page 7-15 Reproduction and communication in any form prohibited without the written permission of
SAGEM SA
For example:
3P@C(config)# show version 6
--------- Board In Slot 6 Version Information ---------
Board Type : ADU_GS_32
Hardware Version : V0.2:
FPGA Version : A1.3
CPLD Version : 1.0
ADU Serial Number : API-71
ADU Firmware Version : X3727
ADU Vendor ID : GSPN
--------------------------------------------------------
7.3.2. 7.3.2. 7.3.2. 7.3.2. Viewing the Current Configuration
Operation Guide
Execute the command show running-config to show the running configuration of the equipment.
Reference index
The result contains the configuration commands and parameters of all modules.
7.3.3. 7.3.3. 7.3.3. 7.3.3. Querying the Port Status
Operation Guide
Execute the command show port [<portlist>|all|active] to query the status information of all ports or specified
ports, including the up/down state, port rate, duplex, flow control and self-negotiation mode.
Reference index
The Up/Down state is consistent with the indication in the panel indicator. The rate, duplex, flow control and self-
negotiation mode of the port are all correct.
For example: View the status of Port 7:7.
3P@C(config)# show port 7:7
--------------------------------------------------------------------------
Port:<7:7> 's Current Value Information
Link state : Up Port state : enabled
Port Default VLAN ID : 2374 Port VLAN name : dsl2374
Remote modem connection : YES
Service Mode : G.dmt Channel Mode : Interleaved