Chapter 12, Line commissioning and maintenance, Adsl technical parameters – Sagem 4450E User Manual

Page 158

Advertising
background image

CHAPTER 12

3P@C Installation Manual

Reproduction and communication in any form prohibited without the written permission of SAGEM SA

12. Line Commissioning and Maintenance

12.1.

Commissioning and Maintenance of ADSL

Subscriber Line

12.1.1. ADSL Technical Parameters

1.1.1.57

ADSL Signal Frequency Range

ADSL splits the frequency band through the passive splitter, realizing the common transmission of voices and
data on the twisted pairs, its signal frequency range is shown as follows:

Figure 12-1 Frequency range of ADSL

Upstream

Downstream

Frequency

In this case:

„

ADSL upstream signal frequency band: 26KHz—138KHz

„

ADSL downstream signal frequency band: 138KHz—1104KHz

„

Telephone audio frequency band: 300Hz—

3,400Hz

ADSL uses the Discrete Multi-Tone (DMT), and each carrier channel is relatively independent, the occupied
frequency band width is 4.3125KHz, and each carrier can transmit the data of 0-15 bits in the signal transmission
stage. Within the range of 0-1.1MHz, it is divided into 256 sub-carrier channels.The application and division of
ADSL is shown in the figure below:

Figure 1-1

ADSL carrier channel application and division

Frequency

Here:

„

US indicates Upstream

Advertising