Sharp UX-CD600 - Manual (Page 32)

Entering Your Name and Fax Number
30
Entering Your Name and Fax Number
Once you enter this
information, it will
automatically appear at
the top of each fax page
you send.
Before you can begin sending
faxes, you must enter your
name and fax (telephone)
number. You also need to set
the date and time.
FUNCTION START/MEMORY
STOP
Important!
FCC regulations require that your name, telephone/fax number, and the date and
time appear on each fax message you send. Enter your name and fax number
here and set the date and time as explained in the following section to have the fax
machine include this information automatically at the top of your fax messages.
1
Press once and twice on
the machine.
2
Press once.
3
Press once.
FUNCTION
Display:
ENTRY MODE
OWN NUMBER SET
ENTER FAX #
Note: Only one fax number
can be entered. If you have
connected two lines to the
machine, it is recommended
that you enter the number of
line 2, as line 2 is normally
used as a fax line.
all.book 30 ページ ２００４年６月２２日 火曜日 午後１２時１分