Sharp UX-CD600 - Manual (Page 46)

Receiving a Fax Using the Cordless Handset
44
START
Press to begin
fax reception
If calls come in on both lines simultaneously
If calls come in on both lines simultaneously, the display will alternately show
<<< RINGING >>> to indicate that there is a call on line 1, and
<<<RINGING 2>>> to indicate that there is a call on line 2 .
To take the call on line 1, press any key (other than ) while
“ <<< RINGING >>>” appears. To take the call on line 2, press any key (other
than ) while “ <<<RINGING 2>>>” appears .
Putting a Call on Hold
To put the other party on hold during a call, press . The cordless handset
will beep while the call is on hold. When you are ready to resume the call,
press once again. Note that placing the cordless handset in the charger
will not break the connection while a call is on hold, and thus phone charges
may continue to apply.
Receiving a Fax Using the Cordless Handset
If you hear a fax tone after answering a call on the cordless handset, or if the
other party speaks to you and then wants to send a fax, press . This
signals the machine to begin fax reception.
Using Auto Attendant Mode
OFF OFF
OFF OFF
HOLD
HOLD
START
<<< RINGING >>> <<<RINGING 2>>>
all.book 44 ページ ２００４年６月２２日 火曜日 午後１２時１分