Sharp UX-CD600 - Manual (Page 60)

Transferring Calls and Making Conference Calls
58
Changing the reception mode on the machine
Note: If a call comes in on line 2 while a cordless handset is being used to
change the reception mode, neither the machine nor the cordless handsets
will ring.
1
Press .
2
Press until the desired reception
mode appears in the display.
3
Press or to exit REMOTE MODE.
REMOTE
/FLASH
JKL
5
RECEPTION
REMOTE
/FLASH
OFF OFF
RECEPTION
TEL
Example: TEL mode
REMOTE MODE
Cordless handset display:
Locking the cordless handset
You can lock the cordless handset to prevent accidental operation. Hold down
on the cordless handset until “LOCK” appears in the display next to the
cordless handset name. When this is done, pressing the keys on the cordless
handset will have no effect. To unlock the cordless handset, hold down
again until “LOCK” no longer appears.
♦
If a call comes in while the cordless handset is locked, the cordless handset
will ring normally. Hold down until the cordless handset unlocks and
then speak with the other party. (It is not necessary to press another key to
answer after unlocking the cordless handset.)
START
START
START
all.book 58 ページ ２００４年６月２２日 火曜日 午後１２時１分