Sharp UX-CD600 - Manual (Page 67)

Operating the Answering System
65
3. Ans
w
er
ing
System
Operating the Answering System
Activating the answering system
To turn on the answering system so that callers can leave messages, press
until appears in the display (this selects TAD mode).
RESOLUTION/
RECEPTION MODE
RESOLUTION/
RECEPTION MODE JAN-02 10:30
♦
It will not be possible to set the reception mode to TAD mode ( ) if a
general outgoing message has not been recorded.
Note: In TAD mode, the machine will automatically switch to fax reception if it
detects 6 seconds of silence after answering a call. For this reason, if a caller
pauses for this length of time while leaving a message, they will be cut off.
Number of rings in TAD mode
When the machine is set to TAD mode, it will answer incoming calls after two
rings if it has received at least one message (in any of the boxes), or after four
rings if it has not received any messages. (See
Toll Saver on page 77.) This
applies to both lines.
Note: The number of rings setting (page 99) does not apply to TAD mode.
No received messages
4 Rings
Received messages
2 Rings
Toll Saver
NOTHING Hello!
Hi! Hi!
Ring
Ring
Ring
Ring Ring Ring
all.book 65 ページ ２００４年６月２２日 火曜日 午後１２時１分