Sharp UX-CD600 - Manual (Page 90)

Sending a Fax by Automatic Dialing
88
Sending a Fax by Automatic Dialing
You can store your most frequently dialed fax or phone numbers in the
machine for automatic dialing.
♦
Auto-dial numbers can be stored using either the machine or the cordless
handset (to store a number using the cordless handset, see page 48).
♦
Numbers stored using the fax machine are stored in the Common book. A
total of 99 numbers can be stored.
♦
When you send a fax by automatic dialing (including Direct Keypad Dialing,
redial, and automatic redialing), the machine will normally use line 2. The
machine will only use line 1 if line 2 is busy (or if line 2 is not connected or
disabled).
Storing fax and phone numbers for automatic dialing
1
Press once and once.
2
Press once.
3
Enter the fax or voice number by pressing the number keys.
(Note: A space cannot be entered.)
•
To clear a mistake, press .
•
If a pause is required between any of the digits to access a special service
or an outside line, press . The pause appears as a hyphen (two
seconds per pause). Several pauses can be entered in a row.
4
Press .
FUNCTION
SPEAKER
FUNCTION
START/MEMORY
Display:
<NEW NUMBER>
ENTER FAX #
all.book 88 ページ ２００４年６月２２日 火曜日 午後１２時１分