Front panel – Sony PCNA-MR10 User Manual
Page 20
RoomLink User Guide
20
Front panel
The front panel contains the power button, infrared receiver, and status
indicators.
Network media receiver (front panel)
1
POWER/REC indicator
The indicator is white while the power is on. The indicator is red during
TV recording. The indicator blinks (red) during firmware updates.
2
Infrared receiver
Enables communication between the RoomLink™ unit and the Remote
Commander® unit. (Do not block the area in front of the infrared
receiver.)
3
Power button/Stand by indicator
Turns RoomLink™ on and off. Indicator is dimmed (red) when the unit
is in Stand by mode.
✍
When the Standby indicator light is red (dimmed), RoomLink™ is ready to be turned
on. The Standby indicator takes approximately 20 seconds to light after the AC adapter
is plugged into a wall outlet.