Sony PCNA-MR10 User Manual
Page 28
Advertising
RoomLink User Guide
28
4
You can set up RoomLink™ to stand in an upright or horizontal position.
Option 1: Slide the network media receiver onto the stand (supplied), until it
clicks into place.
Option 2: To position the unit horizontally, attach the spacers (supplied) to
one side of the network media receiver, placing a spacer in each corner.
5
When the Stand by indicator light is red, press the power button.
To attach the stand or spacers
✍
When the Standby indicator light is red (dimmed), RoomLink™ is ready to be turned
on. The Standby indicator takes approximately 20 seconds to light after the AC adapter
is plugged into a wall outlet.
Option 1
Option 2
Advertising