Sony PCNA-MR10 - Manual (Page 64)

RoomLink User Guide
64
6 From the Power Management tab, select the options, “Allow this device to
bring the computer out of standby” and “Only allow management
stations to bring the computer out of standby”. Click OK.
7 Close the Device Manager window, then click OK to close the System
Properties dialog box.
To change the system Standby setting
1 Click Start in the Windows taskbar and select Control Panel.
2 Click Performance and Maintenance, then click Power Options.
The Power Options Properties dialog box appears.
3 From the Power Schemes tab, in the sections, System standby and System
hibernates, select an option from each drop-down list and click OK.
Network Adapter Properties (detail)
Power Options Properties
✍
It may take a while to connect to a server that is in Standby or Hibernate mode. You
may wish to select the option, Never, as this disables the Standby and Hibernate
modes.