Sony PCNA-MR10 - Manual (Page 42)

RoomLink User Guide
42
ENVIRONMENT 7: Connecting multiple VAIO computers
(Under conditions similar to Environment 5 and 6)
*
* For information on fixed IP addresses, see “Assigning a fixed IP address” on page 47.
Connecting in Environment 7
MONITOR
USB
LINE PHONE
HEADPHONES MIC LINE IN
VHF/UHF AUDIO – VIDEO OUTPUT – AUDIO – VIDEO1 INPUT – S VIDEO/VIDEO S VIDEO/VIDEO
MONITOR
LAN WAN
Router device with
a built-in network
(sold separately)
VAIO® Computer #1
VAIO® Computer #2
To Ethernet port
To Ethernet port
To Ethernet port
Network cable
(sold separately)
Network cable
(sold separately)
Network cable
with ferrite core†
(supplied)
Connections may vary,
depending on your network
environment. Contact your
Internet Service Provider for
connection information.
† Attach the supplied ferrite
core to the supplied network
cable, before connecting the
cable to the network media
receiver.
Network switch* or
RoomLink™
*If connecting with a multiple
port network switch device
(sold separately), the VAIO
computer requires a fixed IP
address.
** Use a router device or a
multiple port network switch
device that is compatible with
100BASE-TX standard. A WAN
connection is not necessary.
switch**