Sony PCNA-MR10 - Manual (Page 40)

RoomLink User Guide
40
ENVIRONMENT 5: The VAIO® computer is connected to the
Internet using the built-in modem
*
Environment 5 — Connection method:
1 Insert one end of the crossover cable (supplied) into the Ethernet jack on
your VAIO® computer.
2 Insert the other end of this crossover cable into the connection adapter
(supplied).
3 Insert one end of the network cable (supplied) that is equipped with the
ferrite core (supplied), into the connection adapter.
4 Insert the other end of this network cable into the Ethernet jack on the
network media receiver.
This connection method may vary, depending on specific factors in your
environment.
* In Environment 5 or 6, the VAIO computer requires a fixed IP address for the LAN
connection. See “Assigning a fixed IP address” on page 47.
Connecting in Environment 5
MONITOR
USB
LINE PHONE
HEADPHONES MIC LINE IN
VHF/UHF AUDIO – VIDEO OUTPUT – AUDIO – VIDEO1 INPUT – S VIDEO/VIDEO S VIDEO/VIDEO
MONITOR
Attach the supplied ferrite
core to the supplied network
cable, before connecting the
cable to the network media
Crossover
cable
To Ethernet port
Connection
adapter To Ethernet por t
Network cable
with ferrite core
(supplied)
VAIO® Computer
receiver.
RoomLink™
Connected to
Internet using
built-in modem