StarTech.com SV1115IPEXT - Manual (Page 26)

22
may not be separately configured. Using DHCP with Bridging increases
boot time, because the 802.1d (STP) algorithm must finish before
the DHCP broadcast can go out. To change this setting, select either
Enabled or Disabled from the drop-down menu and click Commit and
Apply.
This menu will allow you to add accounts other than admin to the
system. These accounts will not have the authority to change settings,
but can access the Web interface and log into the VNC console.
Selecting Delete permanently removes the user from the system. If
you enter values for a user that does not already exist under Edit User
Details, the system will create that user for you when you click Record
changes. If the user already exists, you will change the password for
that user.
Machine Name
This is a name that is used to uniquely identify this machine. You might
want to create a DNS entry that matches this name. The name is
provided as the Client Name for the DHCP server. It is also shown at
the top of each page in the web browser interface and is the “desktop
name” for VNC clients.
Other identification details
These values are for information purposes. They are visible from the
VNC client and via SNMP (if enabled).
Location
This string is sent as the system.sysLocation value over SNMP. It
should describe the location of this system.
Contact Name
This string is sent as the system.sysContact value over SNMP. It
should describe who to contact regarding this machine. Typically it
includes an email address.
Network Address
This value is not used in our configuration, but is meant to store a user-