StarTech.com SV1115IPEXT - Manual (Page 46)

42
the DTE Serial port) to the SV1115IPEXT.
Configuring IPMI on the SV1115IPEXT
Once you have connected the IPMI-configured serial port to the
SV1115IPEXT and enabled the software option, you can begin to
configure IPMI settings through the Web interface. Log in to the Web
interface as admin. Click the Admin/Setup link at the top of the page
and choose IPMI/IPMB setup (Intelligent Platform Management).
You will be presented with the IPMI Status menu. Make the following
changes to enable IPMI:
Serial port
(DTE)
Serial port
(DCE)