Sony PCS-TL33 - Manual (Page 119)

119
Specifications
A
ppe
ndix
Pin Assignment on Optional Board
Connectors
RGB OUT connector (PCSA-DSM1)
Mini D-sub 15-pin (female)
List of Port Numbers Used on the
PCS-TL33
When connecting one-to-one (Default)
When “Port Number Used” is set to “Default” in the
Administrator Setup menu, the PCS-TL33 uses the
following port numbers.
When connecting one-to-one (Custom:
TCP Port Number 3000 and UDP Port
Number 3100)
When “Port Number Used” is set to “Custom” in the
Administrator Setup menu, the PCS-TL33 uses the port
numbers defined by the values entered in “TCP Port
Number” and “UDP Port Number”.
For example, when “TCP Port Number” is set to “3000”
and “UDP Port Number” is set to “3100”, the PCS-TL33
uses the following port numbers.
For the RTP and RTCP signals, ranges higher than the
ones listed above may be used when ports are unable to be
used properly.
Pin Signal Description
1 RED R (red)
2 GREEN G (green)
3 BLUE B (blue)
4 NC -
5 GND Ground
6 RED. GND R (red) signal ground
7 GREEN. GND G (green) signal ground
8 BLUE. GND B (blue) signal ground
9 NC -
10 SYNC. GND Sync signal ground
11 NC -
12 NC -
13 HSYNC Horizontal sync
14 VSYNC Vertical sync
15 NC -
Signal Port number
RAS (PCS-TL33) 1719 (using GateKeeper)
RAS
(GateKeeper) 1718 or 1719 (using GateKeeper)
Q.931 (dial) Any number from 2253 to 2255
Q.931 (answer) 1720
H.245 Any number from 2253 to 2255
Audio RTP 49152
Audio RTCP 49153
Video RTP 49154
Video RTCP 49155
15 11
5 1
10 6
FECC RTP 49156
FECC RTCP 49157
Data conference
RTP 49158
Data conference
RTCP 49159
Signal Port number
RAS (PCS-TL33) 1719 (using GateKeeper)
RAS
(GateKeeper) 1718 or 1719 (using GateKeeper)
Q.931 (dial) Any number from 3000 to 3002
Q.931 (answer) 1720
H.245 Any number from 3000 to 3002
Audio RTP 3100
Audio RTCP 3101
Video RTP 3102
Video RTCP 3103
FECC RTP 3104
FECC RTCP 3105
Data conference
RTP 3106
Data conference
RTCP 3107
Note
Signal Port number