Sony PCS-TL33 - Manual (Page 45)

45
Setting Up the Network Configurations
C
h
ap
te
r 2
Re
gi
s
tra
tion and
S
e
tu
p
The setting has been configured properly if the correct
IP address appears in the launcher menu and
“Registration Confirmed” appears under
“Gatekeeper” in Page 3/4 of the Status & Info menu.
The information that appears in the launcher menu
may differ depending on the “Number Display” setting
in the Device Setup menu. You can also click the
Number Display portion and select the information to
display from a list.
To conduct a video conference
Select “IP” for the line interface, enter the user alias or user
number set by the remote party in the number entry text
box, and dial.
You can set “IP” as the default line interface selection for
the launcher menu by setting “Line I/F” to “IP” in the Dial
settings of the Communication Mode menu.
For details on the setting, see “Communication Mode
Menu” on page 29.
LAN (Connecting Through NAT)
Connection using NAT allows one IP address to be shared
by several computers on the same LAN. This section
describes how to set up videoconferences conducted in
NAT and global IP environments.
Configuration example
1
Enter a name in “Host Name” under Page 1/3 of the
LAN Setup menu, set the “DHCP Mode” to “Off“, and
enter the appropriate values for “IP Address”,
“Network Mask”, and “Gateway Address”.
2
Set “NAT Mode” to “On” under Page 2/3 of the LAN
Setup menu, and enter the appropriate IP address in
“WAP IP Address”.
3
Remote parties must configure Page 1/3 of the LAN
Setup menu in the same way.
If the remote parties are not in a NAT environment,
NAT settings in the LAN Setup menu must be
configured.
To conduct a video conference
Select “IP” for the line interface, enter the remote party’s
IP address in the text box, and dial.
You can set “IP” as the default line interface selection for
the launcher menu by setting “Line I/F” to “IP” in the Dial
settings of the Communication Mode menu.
For details on the setting, see “Communication Mode
Menu” on page 29.
When using the terminal in the NAT environment, you can
connect to a remote party (global IP), but for a remote
Note
Gatekeeper Mode On
Gatekeeper Address
User Alias
User Number
Administrator Setup
Right-click the mouse to display a help message.
Cancel OK
192.100.10.20
PCS-A
100
IP:192.100.10.10
2/11
Internet
Router Router
210.20.20.2
(Global address)
192.168.10.1 210.20.20.1
192.168.10.10
Note
Note
LAN
SIP
LAN
Right-click the mouse to display a help message.
Cancel OK
Auto DHCP Mode
Host Name
IP Address
Network Mask
Gateway Address
DNS Address
Off
VCT1
192.100.10.10
255.255.255.0
192.100.10.1
IP:192.168.10.10
1/3
On
210.10.10.1
Default
NAT Mode
WAN IP Address
Port Number Used
TCP Port Number
UDP Port Number
LAN
SIP
LAN
Right-click the mouse to display a help message.
Cancel OK
IP:192.168.10.10
2/3