Sony PCS-TL33 - Manual (Page 72)

72
Installing the Data Solution Module
Chapt
er 5 Dat
a
Co
nf
e
ren
c
e
Us
ing
Da
ta So
lut
ion
Mod
u
le
Installing the Data
Solution Module
• Be sure to turn the power to all components off before
starting the installation.
• When the Data Solution Module has been connected and
is used for the first time, the Video Communication
System may automatically upgrade the software of the
Data Solution Module. While the upgrading message is
displayed, never turn off the Video Communication
System, to prevent the possibility of serious system
damage.
1
Remove the rear cover.
Pull the cover off towards you.
2
Remove the DSM connector cover.
3
Connect the system connector of the Data Solution
Module to the DSM connector of the PCS-TL33 and
secure with fastening screws.
4
Replace the rear cover of the PCS-TL33.
Push the cover in while aligning the four stubs.
Notes
Connector cover
1
2
2
Connector
Projector or
similar Mini D-sub 15-pin cable
(commercially available)