Lan (connecting with h.460 firewall traversal) – Sony PCS-TL33 User Manual
Page 46
46
Setting Up the Network Configurations
Chap
te
r 2
Regis
tra
tion
and
S
e
tu
p
party to connect to you, you must configure your router
settings. For details on router settings, consult with the
system administrator.
LAN (Connecting With H.460
Firewall Traversal)
You can use H.460 to traverse firewalls and conduct
conferences with terminals on other networks.
Configuration example
1
Set “NAT/Firewall Traversal” to “On (H.460)” under
Page 3/3 of the LAN Setup menu.
You must set up the gatekeeper to use this function.
2
Enter a name in “Host Name” under Page 1/3 of the
LAN Setup menu, set the “DHCP Mode” to “Off“, and
enter the appropriate values for “IP Address”,
“Network Mask”, and “Gateway Address”.
3
Set “Gatekeeper Mode” to “On” under Page 2/11 of
the Administrator Setup menu, and enter the
appropriate values for “Gatekeeper Address”, “User
Alias”, and “User Number”.
The setting has been configured properly if the correct
IP address appears in the launcher menu and
“Registration Confirmed” appears under
“Gatekeeper” in Page 3/4 of the Status & Info menu.
The information that appears in the launcher menu
may differ depending on the “Number Display” setting
in the Device Setup menu. You can also click the
Number Display portion and select the information to
display from a list.
To conduct a video conference
Select “IP” for the line interface, enter the remote party’s
IP address in the text box, and dial.
You can set “IP” as the default line interface selection for
the launcher menu by setting “Line I/F” to “IP” in the Dial
settings of the Communication Mode menu.
For details on the setting, see “Communication Mode
Menu” on page 29.
Note
192.168.10.1
192.168.10.10
Internet
Router
210.20.20.1
210.20.20.2
Traversal
server
(Global address)
Router
3/3
LAN
SIP
LAN
Right-click the mouse to display a help message.
Cancel
OK
NAT/Firewall Traversal
IP:012.345.678.912
On(H.460)
Note
LAN
SIP
LAN
Right-click the mouse to display a help message.
Cancel
OK
Auto
DHCP Mode
Host Name
IP Address
Network Mask
Gateway Address
DNS Address
Off
VCT1
192.100.10.10
255.255.255.0
192.100.10.1
IP:192.100.10.10
1/3
Gatekeeper Mode
On
Gatekeeper Address
User Alias
User Number
Administrator Setup
Right-click the mouse to display a help message.
Cancel
OK
192.100.10.20
PCS-A
100
IP:192.100.10.10
2/11