Symbol Technologies MC3000 - Manual (Page 100)

MC3000 Integrator Guide 6-6
Defining Script Properties
Before a script is created, the script properties must be defined. This defines the type of mobile computer, flash type, number of disks
being created and the memory configuration of each disk partition.
To define the script properties:
1. Select the Script window to make it active.
2. Click the Properties button. The Script Properties window - Partition Data tab appears.
Figure 6-2. Script Properties Window - Partition Data Tab
3. In the Terminal drop-down list, the MC3000C42a v1.0 or MC3000C42b v1.0 entry is already selected.
4. Use the default Flash Type.
5. In the Disks drop-down list, select the number of disk partitions to create.
6. Select the (memory) Size for each disk partition. Note that adding space to one disk partition subtracts space from another.
7. In the Access drop-down list for each disk partition, determine and select the Read/Write access option.
8. Click the Options tab. The Script Properties window - Options tab appears.
Figure 6-3. Script Properties Window - Options Tab
9. Set the paths for the Script File, Flash File and Hex File Build.
10. Click OK.