Symbol Technologies MC3000 - Manual (Page 124)

MC3000 Integrator Guide 7-10
User Certificate Selection
If the User Certificate check box on the Tunneled Authentication dialog box is checked or if TLS is the selected authentication type,
then the Installed User Certificates dialog box displays. The user is required to select a certificate before proceeding. Select a
certificate from the drop-down list of currently installed certificates. When a certificate is selected its name appears in the drop-down
list. If the required certificate is not in the list, it must be installed.
Figure 7-8. Installed User Certs Dialog Box
User Certificate Installation
To install a user certificate (EAP TLS only) and a server certificate for EAP TLS and PEAP authentication:
1. Tap Install Certificate. The Credentials dialog box appears.
Figure 7-9. Credentials Dialog Box
2. Enter the User:, Pwd: (password), and Server: information in their respective text boxes.
3. Tap Retrieve. A Progress dialog appears to indicate the status of the certificate retrieval.
4. Tap ok to exit.
After the installation is compete, the Installed User Certs dialog box displays.
In order to successfully install a user certificate, the mobile computer must already be connected to a network
from which the server is accessible.
Server Certificate Selection
If the Validate Server Cert check box is checked, a server certificate is required. The wizard displays the Installed Server Certs dialog
box and a certificate must be selected before proceeding. An hour glass may be displayed as the wizard populates the existing
certificate list. If the required certificate is not listed, then it must be installed.
To select a certificate:
*********