Symbol Technologies MC3000 - Manual (Page 150)

MC3000 Integrator Guide 7-36
Options
Use the wireless Option dialog box to select various operation settings. The options are saved when Save is tapped. If the user taps
X before saving and an option was changed, a dialog box displays asking the user to close without saving the changes.
The options are:
• Operating Mode Filtering
• Regulatory
• Band Selection
• System Options
• Change Password
• Export.
Operating Mode Filtering
The Operating Mode Filtering options cause the Find WLANs application to filter the available networks found.
Figure 7-41. OP Mode Filtering Dialog Box
The default value has both AP Networks and Ad-Hoc Networks enabled.
Tap Save to save the settings or tap X to discard any changes.
Table 7-22. OP Mode Filtering Options
Field Description
AP Networks
Select the AP Networks check box to display available AP networks and their signal strength within the Available
WLAN Networks (see
Find WLANs Application on page 7-4 ). These are the APs available to the mobile computer
profile for association. If this option was previously disabled, refresh the Available WLAN Networks window to
display the AP networks available to the mobile computer.
AD-Hoc Networks
Select the Ad-Hoc networks check box to display available peer (adapter) networks and their signal strength within
the Available WLAN Networks. These are peer networks available to the mobile computer profile for association.
If this option was previously disabled, refresh the Available WLAN Networks window to display the Ad Hoc
networks available to the mobile computer.