Summit BROTHER HL-630 OPC - Manual (Page 27)

27
Okidata OL-1200 OPC
Okidata OPC Cartridge Part # 56118801
OEM Stated Yield: 30,000
(The procedure for these machines is the same as
used for the Okidata OL-400e, and OP-20)
Turn off the printer
While holding the MENU1/MENU2 button down,
turn the printer back on. Keep holding the button
down until you see USER MNT on the display
panel. Release the button.
Press the MENU1/MENU2 button three times. The
display will read DRUM CTR RESET.
Press the ENTER button. The display will read
WARMING UP, and finally ON LINE. The counter
is reset!
Okidata OP-4W
Okidata OPC Cartridge Part # 56114101
OEM Stated Yield: 10,000
(OkiOffice 44/OkiPage 4W)
(The procedure for these machines is the same as for
the OkiFax 1000/1050/5300/5600, but with a
different cartridge).
Wait until the time, date and answering mode appear
on the display. Then press the Select Function key.
Press the 7/Counter Display One Touch Key. The
display shows “Drum Count”.
Press the Yes (left arrow) key to clear the counter
Press the select Function key to finish.
Okidata OP-8W
Okidata OPC Cartridge Part # 40709901 (Type
6)
(Okidata OP-6W/8W/OkiOffice 84)
OEM Stated Yield: 10,000
(Again, the procedure for these machines is the same
as for the OkiFax 1000/1050/5300/5600, and the
OP-4W, but with a different cartridge).
Wait until the time, date and answering mode appear
on the display. Then press the Select Function key.
Press the 7/Counter Display One Touch Key. The
display shows “Drum Count”.
Press the Yes (left arrow) key to clear the counter
Press the select Function key to finish.
Okidata OP-10e
Okidata OPC Cartridge # 40433305 (Type 5)
OEM Stated Yield: 20,000
(The procedure for these machines is the same as
used for the Okidata OP-6e, OL-600e, OP-14e)
From the computer the printer is directly hooked up
to, enter the Printer Status Monitor. Click on the
“Printer Menu” tab. Click on the “Maintenance” tab.
Click on the “Drum Counter Reset” tab.