Brother hl-3260n opc, Brother hl-5150 opc, Brother hl-5200 opc – Summit BROTHER HL-630 OPC User Manual

Page 3: Brother hl-6050 toner, Brother hl-6050 opc

Advertising
background image

3




Brother HL-3260N OPC

Brother Cartridge

Part #DR-1200

OEM Stated Yield: 60,000

The HL-3260 is Brothers first high speed printer.
The drum cartridge comes with three RED sheets
and two pieces of tape installed on the cartridge.
There is a possibility that there is developer inside
the drum cartridge. Removal of these is what seems
to reset the counter, or there may not be a counter
that has to be reset. These cartridges are still being
investigated.



Brother HL-5150 OPC

Brother Cartridge

Part #DR-510 (DR-3000)

OEM Stated Yield: 20,000

Laser Printers: After replacing the drum unit, keep
the front cover open (make sure the power is on).
Press and hold the "GO" button until all four LED’s
are lit. Once the four LED’s light up, close the front
cover. Make sure the drum LED is off. The counter
is reset!

Fax Machines: Open the front cover. Press the
CLEAR/BACK button. Press 1, when the display
shows Accepted, close the front cover. The counter
is reset!





Brother HL-5200 OPC

Brother Cartridge

Part #DR-520 (DR-3100)

OEM Stated Yield: 25,000

Laser Printers: make sure the machine is turned on
and the Drum LED is blinking. Open the front cover.
Press and hold the GO button for 4 seconds until all
the LEDs light up. Once all the LEDs are lit, release
the GO button. Close the front cover. The counter is
Reset!

Fax Machines: Open the front cover. Press the
CLEAR/BACK button. Press 1, when the display
shows Accepted, close the front cover. The counter
is reset!

Brother HL-6050 Toner

Brother Cartridge

Part #TN-670 (TN-4100)

OEM Stated Yield: 7,500

These cartridges have a gear-driven reset lever that
must be reset. To Reset the cartridge, set the black
reset gear as shown in the picture





Brother HL-6050 OPC

Brother Cartridge

Part #DR-600 (DR-4000)

OEM Stated Yield: 20,000

After replacing the drum unit, keep the front cover
open (make sure the power is on). Press and hold the
"GO" button for four seconds, the display will then
show "DRUM CLEAR". Close the front cover. The
counter is reset!

Advertising