Summit BROTHER HL-630 OPC - Manual (Page 31)

31
Samsung CLP-600 Toner/OPC
Cartridges
Samsung Cart. # CLP-K600A, CLP-C600A,
CLP-M600A, CLP-Y600A
OEM Stated Yield: 4,000 Black, 4,000 Color
These cartridges use a chip that must be replaced
each cycle. The chip is located on the rear of the
waste hopper. There is no known reset method
through the printers menu.
Samsung ML-1210 Toner Cartridges
Samsung SF-5100Cart. # TDR-510P
OEM SF-5100 Stated Yield: 3,000
OEM ML-1210 Stated Yield: 2,500
There are a few different versions of these
cartridges. Some use a fuse some do not. Those that
do use a 5 x 20 mm, glass, fast acting, 63 mA, 125V
fuse to reset the counter. The fuse is located on the
front leading edge of the cartridge. Starter cartridges
do not have a fuse, but will need one when the
cartridge is rebuilt.
Lexmark E210 No fuse, Samsung ML-1210 No fuse,
Nashuatec F-102 Needs Fuse, Samsung SF-5100
Needs fuse
Samsung ML-1610 Toner Cartridges
Samsung Cart. # ML-1610D2
OEM Stated Yield: 2,000
These cartridges use a 5 x 20 mm, glass, fast acting,
63 mA, 125V fuse to reset the counter. The fuse is
located on the front leading edge of the cartridge.
Starter cartridges do not have a fuse, but will need
one when the cartridge is rebuilt. The holder is
already there on the starter cartridges, there is just no
fuse present.
Samsung ML-1750 Toner Cartridges
Samsung Cart. # ML-1750D3/XAA
OEM Stated Yield: 3,000
There are a few different versions of these
cartridges. Some use a fuse some do not. Those that
do use a 5 x 20 mm, glass, fast acting, 63 mA, 125V
fuse to reset the counter. The fuse is located on the
front leading edge of the cartridge. Starter cartridges
do not have a fuse, but will need one when the
cartridge is rebuilt.
Samsung ML-1750 No fuse, Samsung SCX-4216,
and SF-550 both need a fuse, and the Xerox PE-16,
Phaser 3130 and X215 all need a fuse.
Samsung ML-2010 Toner Cartridges
Samsung Cart. # ML-2010D3
OEM Stated Yield: 2,000
There are a few different versions of these
cartridges. Some use a fuse some do not.
Those that do use a 5 x 20 mm, glass, fast acting, 63
mA, 125V fuse to reset the counter. The fuse is
located on the front leading edge of the cartridge.
Starter cartridges do not have a fuse, but will need
one when the cartridge is rebuilt. Samsung ML-2010
No fuse, Samsung SCX-4521 Needs fuse, Xerox
Phaser 3117/3122 Needs fuse, Xerox
WorkCentre/Copy Centre PE-220 Needs a Chip
NOT a fuse. (Just to be different).