Sony CM-Z100SPR - Manual (Page 28)

the key guard, just extend the mouthpiece or
press in quick
succession. You do not need to remove the key
guard to answer the phone. You can guard the
keypad even when the phone itself is locked.
The backlight and key beeps are turned off
when the keypad is guarded. You can also
guard the keypad by pressing and holding the
dial from the standby display.
52: Touch Dial With this feature you can dial a phone number
stored in the phone book without pressing
. When Touch Dialing is turned on
and the mouthpiece is extended, just enter the
memory location number and hold down the
last digit for about two seconds. The name
and number of the memory location will be
displayed and the phone will dial the number.
53: Auto-Retry This programs the phone to automatically
redial a number when the number or the
system is busy. The phone will retry the number
every three seconds up to five times.
50
54: Scratch Pad When you are on a call and need to jot down
a phone number, just access this feature and
use the key pad to enter the number. It will be
saved in your Calls List. When the Calls List
reaches more than 10 list items, the oldest
entries will be deleted as needed to make room
for new entries. To save a number when you
aren’t on a call, use the internal phone book.
Securing your phone.
6: Security. This option allows you to lock your Sprint PCS Phone to
prevent unwanted usage. When your phone is locked you can still
receive incoming calls or make emergency calls, but all other phone
functions are disabled.
Unlike other items on the Features menu, you must enter a lock
code to access the Security menu. Your lock code number is typically
the last four digits of your Sprint PCS Phone Number. You can change
it, but be sure to keep a record of your new code. If you forget it,
you will have to take your phone to the nearest Sprint PCS Center
for assistance.
51