Sanyo PJ MASTER POA-PJNM01 - Manual (Page 21)

21 PJ Master
Owner’s Manual
Editing the server information
1. Select the server you intend to edit server information. Right-click on it and then select Edit on
the popup menu. The edit server window appears.
2. Edit server information on the window.
3. Click
OK to set the information. The edit window will close.
Deleting the server
1. Select the server you intend to delete. Right-click on it and then select Delete on the popup menu.
2. Click Yes on the confirmation dialog.
Adding the target
1. Select the top server or sub server under which you intend to place the target. If the target is
registered under the selected server, the target icon will appear on the target edit window.
2. Right-click on the target edit window and select Add on the popup menu. The target registering
window appears.
3. Select target either PJ or PDP, and enter target name and IP address.
4. Click
OK to set the information. The setting window will close. The registered target will be listed
on the target edit window.
Group editing