Sanyo PJ MASTER POA-PJNM01 - Manual (Page 6)

6
Chapter 1 Introduction
Overview
The PJ Master is a software to manage and control targets (Projectors and PDP monitors) in a
network centrally, and forms a tree structure with the targets and servers. The top server manages
operating condition of the targets centrally and provides functions to control targets and update the
software remotely. The PJ Master operates in cooperation with database software, registers all the
information in the database, and displays them on the status window.
Features
- Managing the operation condition of targets centrally.
- Central controlling the targets by serial command transferring via the network.
- Updating the firmware of the projectors *.
- Updating the program of the PJ Master on the servers.
- Updating the firmware of Network Board on the targets.
* Only the model which supports the firmware updating via the network.
System chart
Following example shows a system configuration chart using with the PJ Master. All the projectors
and PDP monitors are controlled and monitored by the top server.
Top Server Server_A
Server_C
Server_D
Server_E Server_B
Server_G
PDP_201 PDP_202 PDP_203 PDP_204 PDP_20x
Proj_01 Proj_02 Proj_03 Proj_04 Proj_05
Proj_101 Proj_102 Proj_103 Proj_104 Proj_105
Proj_201 Proj_202 Proj_203 Proj_204 Proj_205
Proj_301 Proj_302 Proj_303 Proj_304 Proj_305 Proj_30x
Proj_401 Proj_402 Proj_403 Proj_404 Proj_405 Proj_406 Proj_407 Proj_40x
Proj_06 Proj_07 Proj_08 Proj_09 Proj_10 Proj_x
Server_F
PDP_101 PDP_102 PDP_103 PDP_104 PDP_10x