Sanyo PJ MASTER POA-PJNM01 - Manual (Page 46)

46
Chapter 4 Advanced setting
Customizing the command list
The available commands in the Global Setting menu are defined by the text file “Define_PJ.def ”
for projector or “Define_PDP.def ” for PDP monitor. They are located on folder “Program” in folder
“PMS”. When you change the TEXT(command) on the Global Setting window, this file will be updat-
ed automatically. If you want to add new commands, edit this file depending on your environment.
Define file for projector
The default setting in the “Define_PJ.def ” file is described as follows;
[GROUP LIST]
COUNT = 15
GROUP1 = POWER
GROUP2 = VOLUME
GROUP3 = MENU
GROUP4 = DATE
GROUP5 = TIME
GROUP6 = SCREEN
GROUP7 = BLUEBACK
GROUP8 = DISPLAY
GROUP9 = LOGO
GROUP10 =PMANE
GROUP11 =PJNAME
GROUP12 =SMTP
GROUP13 =ADMINI
GROUP14 =MAIL1
GROUP15 =FANSPEED
[POWER]
SEC_MODE = EXCLUSIVE
POWER ON =C00
POWER OFF =C01
[VOLUME]
SEC_MODE = EXCLUSIVE
VOLUME UP =C09
VOLUME DOWN =C0A
[MENU]
SEC_MODE = EXCLUSIVE
MENU ON MODE =C1C
MENU OFF MODE =C1D
[DATE]
DATE SETTING =LF DATE 2003/11/29
[TIME]
TIME SETTING =LF TIME 12:00
[SCREEN]
SEC_MODE = EXCLUSIVE
SCREEN NORMAL =CF SCREEN NORMAL
SCREEN WIDE =CF SCREEN WIDE
[BLUEBACK]
SEC_MODE = EXCLUSIVE
BLUE BACK ON =CF BBACK ON
BLUE BACK OFF =CF BBACK OFF