Sanyo PJ MASTER POA-PJNM01 - Manual (Page 38)

38
Chapter 3 Basic operation
Reading of alert log
Displays the alert logs. Records the information when the alert occurs and is canceled.
Select Alert from Display - Log menu or click
button on the tool bar.
Before executing the Alert Log command, first select a top server, a sub server or a target. The alert
logs on the selected server or target will be displayed on the alert log screen window.
If there is the alert item on the target or server in the network, the alert information is indicated as
follows;
Value indicated with red : Alert occurred
Value indicated with green : Status changed
Value indicated with blue : Alert has been resolved
Item Description
Server Name The name of the server which manages the target which had an alert.
Target Name The name of the target which had an alert.
Power Status Status of the network equipment (Power-on, StandBy, Cooling, CountDown, etc.)
Lamp Status Status of lamp (On, Off, Error, Replace, indicated with lamp1, lamp2, lamp3, lamp4
sequentially)
Input Signal Name of input signal (Analog, Digital, S-Video, Video, Y/Cr/Cb, Y/Pr/Pb, etc.)
Input Status Status of input signal (On, Off, Interrupted)
Input Select Displays input mode (1,2,3 etc)
Network Status Status of network connection (Disconnect, Connect)
Temperature A Displays inside temperature A of the equipment (in Celsius or Fahrenheit)
Temperature B Displays inside temperature B of the equipment (in Celsius or Fahrenheit)
Temperature C Displays inside temperature C of the equipment (in Celsius or Fahrenheit)
Lamp Time Displays lamp use time (lamp1, lamp2, lamp3, lamp4)
IP Address Displays IP address of the equipment
Model Name Displays model name of the equipment
Projector Time Displays accumulated projector use time
PJ-Net Ver. Displays the version of the Network Board firmware or PJ Master
PJ Ver. Displays the firmware version of the projector
Execute Date Displays the aleart occured date
* In the csv file, information which alert occurred is indicated with @, information which alert has been
resolved is indicated with # and information which status changed is indicated with *.
* The alert log of the last selected target or server will be displayed when selecting multiple targets or servers.