Sanyo PJ MASTER POA-PJNM01 - Manual (Page 49)

49 PJ Master
Owner’s Manual
Command name Command Description
POWER ON C00 Turns on the target
POWER OFF C01 Turns off the target
VOLUME UP C09 Increase sound volume one step
VOLUME DOWN C0A Decrease sound volume one step
MENU ON C1C Displays osd menu on the screen
MENU OFF C1D Switches off osd menu on the screen
DATE SETTING LF DATE YYYY/MM/DD Sets date, ex:2005/05/18
TIME SETTING LF TIME hh:mm Sets time, ex:16:45
SCREEN NORMAL CF SCREEN NORMAL Switches screen to “Normal”
SCREEN WIDE CF SCREEN WIDE Switches screen to “Wide”
SCREEN FULL CF SCREEN FULL Switches screen to “Full”
BLUE BACK ON CF BBACK ON Sets blue back function on
BLUE BACK OFF CF BBACK OFF Sets blue back function off
DISPLAY ON CF DISP ON
DISPLAY OFF CF DISP OFF
LOGO ON CF LOGO ON Sets logo display on while starting up
LOGO OFF CF LOGO OFF Sets logo display off while starting up
POWER MANAGE-
MENT ON
CF P-MANA ON Sets power management function on
POWER MANAGE-
MENT OFF
CF P-MANA OFF Sets power management function off
PROJECTOR NAME
SETTING
LF PRJNAME xxxxxx Sets projector name “xxxxxx”
SMTP SETTING LF SMTP 192.168.0.1 Sets smtp address “192.168.0.1”
ADMINISTRATOR
ADDRESS SETTING
LF ADMIN [email protected] Sets administrator e-mail address
MAIL1 ADDRESS
SETTING
LF MAIL1 [email protected] Sets e-mail address
FAN SPEED SETTING
MAXIMUM
CF FANSPEED MAX Sets fan speed mode to maximum
FAN SPEED SETTING
NORMAL
CF FANSPEED NOR Sets fan speed mode to normal
INPUT 1 SELECTION C05 Sets input selection “Input 1”
INPUT 2 SELECTION C06 Sets input selection “Input 2”
INPUT 3 SELECTION C07 Sets input selection “Input 3”
INPUT 4 SELECTION C08 Sets input selection “Input 4”
Predefined command list
Executing commands
* Some kinds of commands may not effective or may differ depending on each model. For further infor-
mation, please contact your sales dealer.
Predefined command list